- Venus. Facade private cottage AA - BB.
private homes are processed so that the surface level : there should be
large deviations in the vertical line. That is, if the wall is uneven ,
they zaravnivayutsya .
strong deviations are aligned as follows: on the wall with dowels is a
steel net , then it is applied a layer of solution. If there is a bulge
in the wall , they should be cut down with a chisel.
the wall is smooth, but it remained greasy or oily stains , the solution
to these places will not be held . Therefore , such a surface should be
degreased with 5 % solution of soda ash . Then the surface is treated with
water using a brush.
a perfectly straight walls are put small grooves. This solution will allow
tighter grasp . After the application is processed groove wall damp brush.
hardened mortar and dirt on brickwork cleaned with a steel spatula or wire
brush . The dust and the remains of plaster are best removed with compressed
air , blowing them timbered
facades of private houses. To identify unstable areas of masonry , the
entire surface is tapped with a hammer. Problem areas are repulsed , and
the resulting irregularities are filled with leveling compound.