Neptune. Facade CC-DD.
facades of private houses are processed in such a way
that the surface is smooth: there should be no large deviations of the
vertical line. That is, if the wall is uneven, they zaravnivayutsya. Particularly
strong deviations are aligned as follows: on the wall with dowels attached
steel mesh, and then it put a layer of mortar. If the wall is convex, then
they should be cut down with a chisel.
the wall is smooth, but it still greasy or oily stains, the solution in
these places will not hold. Therefore, such a surface must be degreased
with 5% solution of soda ash. The surface is treated with water using a
brush.On the walls are put perfectly aligned small grooves. This solution
will allow tighter grip. After the application is processed groove wall
mud and dirt on the masonry cleaned with a steel spatula or wire brush.
The dust and the remains of plaster are best removed with compressed air,
blowing their facades of private houses
. To identify fragile sites of masonry, the whole surface of taps with
a hammer. Problem place kicking, and the resulting irregularities are filled
with a leveling mixture.